Pages and panels
The editor is one window with seven pages. Each page is a place for one part of the work, with its own tools and its own panel sizes. Moving between pages does not change your edit: the timeline and the viewer stay as they were.
This page is about the Full layout. The Simple layout has three places instead of seven pages; see The simple editor and the full editor.
The seven pages
The pages are in the order you usually work: Media, Cut, Edit, Compose, Colour, Audio and Deliver. Their names are always written: on a computer they sit in a row under the top bar, and on a tablet they sit in a column on the left.
Media
Media is where your footage lives. The bins and the search are on the left, the pool of clips is in the middle, and the selected clip's viewer, probe details, tags and notes are on the right. From here you place a clip on the timeline with Insert, Overwrite, Add to end, Place on top or Place over. The timeline is hidden until you choose Show timeline, which opens a short strip for context.
Cut
Cut is for assembling quickly. The source tape on the left lists the project's media, the viewer is in the middle and the inspector is on the right. Under them, a strip shows the whole timeline at a glance over the detailed timeline. Insert at playhead places a source at the nearest cut and pushes what follows along; Review plays a clip at a speed scaled to its length; Boring shots lists long, still shots the analysis found. Each row in the tape has Watch, which opens that clip in the viewer as a source. From Cut to Edit walks through a first cut.
Edit
Edit is the full editing page and the one you land on first. The left panel holds Media, Markers, Edits, Analyse, Transcript, Subtitles, Takes, Structure, Comments and History; the right panel holds Inspector, Assist, Settings, Versions and Compare. The viewer is in the middle and the timeline runs across the bottom. Use it for trimming, moving, titles, transitions, animation, versions and comments. The timeline toolbar across the bottom holds the everyday tools, including Remove silence and Cut to the music. Selecting a clip in the Media tab opens it in the viewer as a source, the same as Watch on Cut.
From Cut to Edit
This is a first cut, start to finish. Each step names the page it happens on.
- Load a source. On Cut, choose Watch on a row of the source tape. On Edit, select a clip in the Media tab. The viewer switches to Source and plays that file, not your film.
- Mark the part you want. Press
Spaceto play, orJ,KandLto shuttle, and use the arrow keys to step. PressIfor the in point andOfor the out point. Clear in and out (Alt+X) removes both. A sound or a still has no frames to mark, so it is placed whole. - Place it. Put the timeline playhead where it goes, then press the button under the viewer
(Insert, Overwrite, Add to end or Place on top) or its key:
F9Insert,F10Overwrite,F8Add to end,Shift+F8Place on top. The marks decide which part of the source is used and the timeline playhead decides where. The viewer stays on Source, so you can mark the next piece straight away. On a Mac,F8,F9andF10are media keys unless you holdFn; you can set other keys. - Switch to Record. Press
Shift+Vor choose Record in the viewer's switch. The viewer now shows your film. Choosing a picture tool (for example Mask) switches to Record for you. - Trim. Select a clip and drag an end, using the trim control on the timeline toolbar (see
Trim modes). Go on to Edit (
Shift+3) when you need titles, transitions, animation or comments.
What Source and Record do
Source and Record are two views in the one viewer, not two viewers. In Source, Space, J,
K, L, the arrow keys, Home, End, I, O and Clear in and out act on the source and change
nothing in the film. Previous and next edit and marker do nothing there. Placing is the only change
that goes forward from Source. The switch is Shift+V, or Source and Record in the
viewer. A source stays open while you switch back and forth. The placement keys need a source open;
without one they do nothing and the buttons say to open a clip first. Source is a desktop feature; the
phone has no switch.
The Source monitor is named after the open file, for example Source: clipA.mp4. It has a scrub bar for the source position, Go to start of source and Go to end of source, and one Place menu in the transport with Insert at playhead, Overwrite, Add to end and Place on top. Your in and out marks show as a caption over the bottom of the Source picture. Holding a placement key places once; it does not repeat.
Editing from Source
In Source, a shortcut that changes the timeline does nothing: delete, lift, blade, cut, paste, duplicate, the nudges, move to the track above or below, link, unlink, add adjustment clip, mask shape and invert, and Compose remove. The command palette lists them as disabled with "Switch to Record to edit the timeline." Undo and Redo still work.
A timeline right-click menu item or a toolbar button that writes to the timeline works differently: it switches to Record first, then runs. Copy, speed, properties, select, mark and place do not switch; the viewer stays on Source. Dragging on the timeline does not switch either.
Some actions that look like viewing also switch to Record first: Review on Cut, the Clip and Playhead steppers, Play in to out and audition.
Trim modes
The timeline toolbar has a four-way control: Ripple, Roll, Slip and Slide. Hover a
button to see what it does and its key (R, T, Y, U); on a narrow pane the four fold into one
menu. The control is one Tab stop; move between the four with the arrow keys.
When the toolbar is short of room, the trim control, the Clip and Playhead steppers (the Step button) and the zoom slider fold into menus. The zoom buttons stay.
- Ripple (default): the edge you drag moves, and everything after it moves with it.
- Roll: the cut between two clips moves; the film keeps its length.
- Slip: the clip keeps its place and length, and a different part of the source shows.
- Slide: the clip moves along the track; the neighbour on the side you drag takes up the change.
In Slip or Slide, with a mouse or pen, dragging the body of a clip slips or slides it. Hold
Shift, Ctrl or Cmd while you drag for an ordinary move, or switch mode. A clip that cannot slip
or slide (a slip needs a source to move through, a slide needs a neighbour) moves normally, and a hint
says why: "This clip has no source to slip, so the drag moves it."
Escape cancels any drag with one press, ordinary clip moves included, and nothing is written.
While you drag, a readout says what will happen in words, with frames and timecode, for example "Ripple: the end moves 12 frames (00:00:00:12) later, everything after it shifts with it". When the edge stops, the line says why: the start or end of the source, a clip must keep at least one frame, or the neighbouring clip has no more to give. When the source's length is known, a trim drag stops at the end of the source and the readout says "Stopped: the end of the source." The slip readout reads, for example, "Slip: same length, shows the source 12 frames later."
During a ripple, dashed ghosts show where the clips after the edge will land, and the line reads "Moves N clips by T". A move onto another clip says "Won't fit here" and leaves both clips as they were: nothing is overwritten or pushed.
Snapping
With snapping on (N), a dragged edge jumps to a nearby point, and a label names what it caught:
Snapped to playhead, Snapped to marker, Snapped to In point, Snapped to Out point,
Snapped to clip edge on a named track, or Snapped to the start. The snapping button shows
Snapping on or Snapping off with its key.
Right-click menus
Menus show the keys that are set now. Right-click an empty part of a lane or the ruler for its own
menu: paste here, close this gap, set marks, add a marker and, when a source is open, the placement
actions. Press the ContextMenu key or Shift+F10 on a selected clip to open its menu; a shortcut you set
on Shift+F10 wins over this. The "here" items (paste here, add a marker here and the like) move the
playhead to where you clicked first, and a marker stays inside the film. The clip menu
groups Arrange, Link, Select and gaps and Picture into submenus.
Compose
Compose is for what happens to a clip's picture. Open it with a clip selected. The left side lists
what is on the clip (a video clip: Mask, Reframe, Keyer, Corner pin, Effects, Motion, Node view; an
adjustment clip: Grade, Effects, Node view; an insert: Matte, Corners) and the right side shows the
properties of the entry you pick. The viewer shows a mask, reframe or corner pin's handles on the
picture while its tool is on (pin handles show only while the pin tool is on). Tool bars sit in one row above the picture, not over it. Arrow keys in the list select an entry and bring up its tool while focus stays on the list; click or press Enter to move focus to the picture. A mask, reframe or pin tool ends when you change page. Mask, keyer, corner pin and reframe show on the
picture as outlines. The viewer shows their effect on the picture, and the badge above the viewer tells you if it only gets close to the finished video. You can also reach Add mask (rectangle or ellipse) and Add reframe from the
clip menu and from the Inspector's Mask and reframe section without coming here.
Colour
Colour is the grade page. The node stack and the target are on the left, the picture with the scopes under it is in the middle, and the grade tools are on the right as tabs: Primaries, Curves, LUT, Secondaries, Groups and Gallery. Everything is visible when the page opens; there is no extra switch to turn on. Curves, LUTs and secondaries show in the viewer as they do in the finished video; the badge above the viewer says when a colour is still being prepared.
On Primaries, lift, gamma and gain are round colour wheels, with an offset wheel beside them. Fix exposure sits in the Look area and brightens or darkens the clip for you. See Fix colour and exposure.
Audio
Audio is the mixer page. The mixer is on the left, the picture in the middle and the buses and the voice-over recorder on the right. Each track has a volume fader, pan, mute and solo, and a meter; the master shows the mix. Loudness, Ducking and the expert controls for buses, compression and clean-up are here too.
Deliver
Deliver is where you make the finished film. Render settings take the left column and the result takes the rest of the page, with no timeline below. Choose a preset and the range, name the file if you want, read the statement of what will be rendered and what it costs, and press Render. On the right, the latest film comes first, then the queue with each render's progress, its download when it is finished and the reason if it failed, then review links, export for other apps and the hand-off package. See Export your film.
Badges on the timeline
A clip that has been adjusted shows small badges on the timeline, in a row along the right side of the clip, under its name. Each badge stands for one kind of change:
| Badge | What it means |
|---|---|
| Motion | The clip is moved, scaled, rotated or animated. |
| Follows a subject | The clip follows a subject you picked. |
| Crop | The clip is cropped. |
| Speed | The clip is slowed, sped up, reversed or frozen. |
| Colour | The clip has a grade, a LUT, a colour group or a camera profile. |
| Mask | The clip has a shape mask or an object mask. |
| Object effects | The clip has an effect on an object, such as a blur. |
| Green screen | The clip has a colour key. |
| Effects | The clip has effects such as blur or grain. |
| Stabilise | The clip is stabilised. |
| Reframe | The clip is reframed around a subject. |
| Corner pin | The clip is pinned to four corners. |
Fades do not have a badge. A fade shows as a thin line in the corner of the clip instead.
A hollow badge means the change is there but switched off. A small dot on a badge means the viewer only gets close to the finished video for that change: amber for close, and a second colour for a change the viewer cannot show. Point at a badge to see its name and, when it applies, the reason. If the clip is too narrow for all the badges, you see one badge with a number; open the clip menu to see the list.
- Open it. Click or tap a badge to select the clip and go to the place where that change lives.
- Turn it off or remove it. Right-click a badge (press and hold on a touch screen) to open its menu: Open, Turn off (or Turn on) and Remove. Remove is one step, so Undo brings it back.
- From the keyboard. Open the clip menu and choose Adjustments. It lists the same badges with the same actions.
A clip that is being processed
While a background job works on a clip, the clip shows it. A strip runs along the bottom of the clip, filling as the job goes, or sliding when the job cannot say how far along it is. The clip is slightly dimmed and its label says Processing. If you have asked the editor to reduce motion, the strip is a still pattern.
- Ready to review appears on the clip when the job finished and needs your OK. Click it to open the result.
- Did not finish appears with a red mark when the job failed. Point at it to read why.
The clip is protected while the job runs. If you try to change something the job depends on, such as the clip's footage, its speed or, for some jobs, its crop or position, the editor asks first. You can go on, stop the job or go back. See See what is running in the background.
Moving between pages
Click or tap a page name. With a keyboard you can also press Shift+1 for Media, Shift+2 for Cut,
Shift+3 for Edit, Shift+4 for Compose, Shift+5 for Colour, Shift+6 for Audio and Shift+7 for
Deliver. Ctrl/Cmd+K opens the command palette, where you can type a page name and run it. The
browser's back and forward buttons move between the pages you visited, like any other link.
The address remembers the page
The page you are on is part of the address, for example ?page=colour. Reload the page and you stay
where you were, and an address you send to someone opens the page it names. An address with no page
opens the last page you used on this device; if you have never opened the editor before, it opens
Edit.
Panel sizes and resets
Drag the thin line between two panels to make one wider or narrower, or focus the line and use the arrow keys. Each page remembers its own sizes on this device, and they adapt when the window changes size. Reset this page puts the page you are on back to its default sizes. Reset every page puts every page back and asks first. A saved Layout keeps a set of panel sizes and open tabs that you can apply again.
On a phone
A phone keeps its own layout: a top bar, the picture, the timeline strip, and a bar at the bottom with Media, Edit, Audio, Look and Captions. It has no page row. Cut, Compose and Colour need a larger screen, and the phone says so where those tools would be. Fix exposure is still there, in the Look sheet. Everything else is the same editor, so a change made on a phone is saved with the timeline.